Infiniti QX80 (Z62) Factory Service And Repair Manual

This comprehensive manual is an essential resource for owners and mechanics working on the Infiniti QX80 (Z62). It includes detailed information on maintenance procedures, troubleshooting techniques, and repair instructions. Covering all major systems—engine, transmission, electrical, and more—the manual ensures precise diagnostics and efficient repairs. Additionally, it provides insights into error codes, wiring diagrams, and sensor locations, making it easier to address common issues. Ideal for maintaining peak performance and extending the lifespan of your vehicle.

• Home Page>>
• Infiniti All Models>>
• Infiniti QX80 (Z62) Wiring Diagram>>
• Infiniti QX56 (JA60) Service Repair Manual>>
• Infiniti QX56 (Z62) Service & Repair Manual>>

Infiniti QX80 (Z62) VK56VD Engine – 5.6-liter V8 with direct fuel injection (Direct Injection) and variable valve timing (VVEL) technology. Power varied depending on the year of production, from about 400 to 428 hp.

Suspension problems:

Description: Common complaints about wear of the front control arms, stabilizer bushings, ball joints. The hydraulic suspension system (if equipped) may fail, especially under intensive use.

Prevention:

Carry out regular suspension checks every 10-15 thousand km.

Use quality parts when replacing.

Do not overload the car.

2. Engine management system malfunctions (VK56VD):

Description: Possible problems with the variable valve timing system (VVEL), dirty injectors and clogged fuel filters.

Prevention:

Use high-quality fuel.

Change the oil regularly (after 7-10 thousand km).

Clean the injectors every 30-40 thousand km.

3. Electrical and Sensors:

Description: Problems with tire pressure sensors (TPMS), ABS errors and faulty tail light wiring.

Prevention:

Have electronics diagnosed every 15,000–20,000 km.

Update software at the dealer if necessary.

Check and clean wiring connectors regularly.

4. Brake Corrosion and Wear:

Description: Rapid wear of brake discs and pads, corrosion of brake pipes (especially in regions with a lot of salt in winter).

Prevention:

Change brake fluid every 2 years.

Use corrosion-resistant materials.

Flush the underbody of the car in winter.

5. Oil Leaks:

Description: Oil leaks around valve covers and oil pan gaskets.

Prevention:

Check oil level every 5,000 km.

Eliminate the slightest leaks at an early stage.

6. Transmission problems (7-speed automatic):

Description: Possible jerking when shifting gears, especially under high load conditions.

Prevention:

Change transmission oil every 60 thousand km.

Avoid abrupt starts and strong overloads.

7. Weak paintwork:

Description: Rapid appearance of chips and scratches on the body, especially on the hood and fenders.

Prevention:

Use protective coatings, such as liquid glass or film.

Wash the car with mild detergents and avoid abrasive materials.

General maintenance recommendations:

• Carry out system diagnostics every spring and fall.
• Use only original or high-quality analogs of spare parts.
• Regularly update the software of on-board systems.
• Pay attention to any strange sounds or behavior of the car to eliminate the problem in time.