Mazda CX-5 (KF) 2017-2025 Electrical Wiring Diagram is a detailed wiring diagrams that includes information about all electrical components of the car. Includes wiring diagrams for the engine, lighting, security system, multimedia and other units. Useful for diagnostics, repair and upgrade of the electrical system.
Mazda CX-5 (KF) 2017+ Accessory Installation Instructions | Download |
Mazda CX-5 (KF) 2017+ Electronic AWD Control System | Download |
Mazda CX-5 (KF) 2017+ Body Control System (Start Stop Unit, FBCM) | Download |
Mazda CX-5 (KF) 2017+ Entertainment System Audio System | Download |
Mazda CX-5 (KF) 2017+ Glass Windows Mirrors EWD | Download |
Mazda CX-5 (KF) 2017+ Instrumentation Driver Info | Download |
Mazda CX-5 (KF) 2017+ Lighting Systems | Download |
Mazda CX-5 (KF) 2017+ Power Systems | Download |
Mazda CX-5 (KF) 2017+ Seats | Download |
Mazda CX-5 (KF) 2017+ Security And Locks | Download |
Mazda CX-5 (KF) 2017+ Sunroof | Download |
Mazda CX-5 (KF) 2017+ Wiper Washer System | Download |
Mazda CX-5 (KF) 2017+ Electric Parking Brake (EPB) | Download |
Mazda CX-5 (KF) 2017+ Charging System (SKYACTIV-G 2.0, 2.5, D 2.2) | Download |
Mazda CX-5 (KF) 2017+ Electrical Wiring Schematic | Download |
Mazda CX-5 (KF) 2017+ Fuse Box (Fuse Block) | Download |
Mazda CX-5 (KF) 2017+ Ground Point (Body) | Download |
Mazda CX-5 (KF) 2017+ Starting System (SKYACTIV-G 2.0, 2.5, D 2.2) | Download |
1. Sensor problems
ABS sensors
ABS and ESP errors may occur, accompanied by an indicator on the dashboard.
Causes: dirty or damaged sensor wiring.
Solution: clean the sensors or replace them.
Tire pressure sensors (TPMS)
False alarms, even at normal pressure.
The batteries in the sensors may discharge after 4-5 years.
Oxygen sensor (lambda probe)
Check Engine error, deterioration in fuel consumption.
Cause: dirty or worn out.
Parking sensors
False alarms or failure.
Often due to dirt or damaged wiring.
Rear view camera
The image disappears, the screen flickers.
Cause: faulty connector or damaged wires in the rear door.
2. Wiring problems
Chafing of wires in the doors
Over time, problems with the central lock, window lifters, and speakers may appear.
Corrosion of contacts
Especially relevant for connectors in the engine compartment and taillights.
Failure of fuses and relays
Can cause failure of individual systems (for example, climate control or lighting).
3. Problems with multimedia and electronics
Mazda Connect freezes or reboots
Reason: software failures.
Solution: update the software at the dealer.
Weak battery and problems with starting
Especially for cars with the "Start-Stop" system.
Solution: replace the battery with a more capacious analog.
Problems with headlights and taillights
Sometimes there are burnt-out LEDs or fogging of headlights.
4. Generator and battery charging
In some cases, the generator does not produce sufficient voltage, which leads to a rapid discharge of the battery.
Solution: diagnostics of the generator and timely replacement of the voltage regulator.