Nissan Teana J32 2008-2014 Factory Service Manual

Repair and diagnostics guide, error codes Nissan Teana J32 (2008-2014) is a detailed guide for owners and auto mechanics, providing all the necessary information for maintenance, diagnostics and repair of cars of this model. The book contains instructions for troubleshooting all key systems of the car, including the engine, transmission, suspension and electronics. Also included are diagrams, technical data and operating tips. This guide will help maintain the Nissan Teana J32 in excellent condition and effectively solve emerging problems. Free Download

• Home Page>>
• Teana J32 Electrical Wiring Diagram>>
• Nissan Teana J32 2008-2014 Engine Service Manual>>
• Nissan Teana J32 2008-2014 Error Codes List>>

Engine: VQ25DE, VQ35DE

CVT: RE0F09B, RE0F10A

1. Problems with the CVT

Signs: Jerking when shifting gears, jerking when driving, deterioration of acceleration dynamics.

Cause: Overheating or wear of CVT components.

Solution: Regular replacement of transmission fluid (every 40-60 thousand km), installation of additional CVT cooling, compliance with operating recommendations (do not overload the car, avoid abrupt starts).

2. Wear of suspension silent blocks

Signs: Knocking and noise in the front suspension, deterioration of controllability.

Cause: Silent blocks can quickly wear out on uneven roads.

Solution: Regularly check the condition of the suspension and replace worn parts.

3. Problems with the air conditioner

Signs: Poor cooling, strange noises from the air conditioning system.

Cause: Refrigerant leak or compressor problems.

Solution: Diagnose the air conditioning system, check for leaks and top up the freon in a timely manner, and replace the compressor if necessary.

4. Steering rack malfunctions

Signs: Extraneous sounds when turning the steering wheel, play or stiffness of the steering wheel.

Cause: Rack wear, lack of lubrication or hydraulic fluid leakage.

Solution: Regularly check the steering system and, if necessary, repair or replace the steering rack.

5. Brake disc wear

Signs: Vibrations when braking, creaking or grinding.

Cause: Rapid wear of the brake discs due to the quality of the material or intensive use.

Solution: Regularly replace the brake discs and pads, use high-quality components.

6. Electrical problems

Signs: Malfunctions in the multimedia system, incorrect operation of the headlights or instruments.

Cause: Oxidation of contacts, faulty sensors or control units.

Solution: Regularly check the wiring, clean the contacts and replace faulty components.

7. Engine problems (VQ and QR series)

Signs: Increased oil consumption, loss of power, detonation.

Cause: Wear of piston rings, valves, seals.

Solution: Regular engine diagnostics, replacement of worn parts and use of high-quality motor oils.

Proper maintenance:

• Oil and filter change: Every 5,000-7,000 km.
• CVT maintenance: Every 40,000-60,000 km.
• Suspension and brake system check: Every 10,000 km.
• Diagnostics of the air conditioning and electrical system: Once a year or when problems arise.